Chemical plants run pumps, compressors, agitators and valves in contact with acids, solvents, oxidizers and reactive gases. We supply inert PCTFE and PFPE lubricants, seal barrier fluids and injectable sealants that hold up where ordinary products react or break down.
A failed seal can mean a leak, a fire risk or a shutdown.
Choose a machine to see what we recommend. Send us the chemicals involved and the operating temperature, and we’ll confirm a compatible product.
| Equipment | Common problem | What we recommend |
|---|---|---|
| Pumps & compressors | Oil breaks down in chemical service | Halocarbon 27, 56, 95 and 200 |
| Mechanical seals | Seal failures, heat, leaks | Halocarbon MSHV06, MSLV27, MSLV56 |
| Valves, gaskets, O-rings | Grease reacts or swells seals | Halocarbon 25-5S, 25-10M · Krytox™ greases |
| Pump, valve & agitator packing | Leaks, frequent packing changes | Kem-A-Trix injectable sealants |
| Reactive-gas vacuum pumps | Oil reacts with process gas | Krytox™ NRT 8805 · Halocarbon oils |
| Utilities | General wear | Lubriplate compressor and hydraulic oils |
We’ll confirm the right grade for your conditions before you order.
Both are inert, nonflammable fluorinated fluids. The chemistry decides where each one does best.
Send us the chemicals or gases involved, the temperature and the pressure. We’ll recommend a product and send its data sheet.
For chlorine, chlor-alkali and Lewis acids, PCTFE (Halocarbon) is the recommended choice. For very high temperatures, PFPE (Krytox™) usually fits better. We’ll help you choose.
Tell us the chemicals involved, temperature, pressure and the equipment. We reply within one business day, in English or French.