Canadian-based · North American reach · Since 1882
450-218-9908 Toll-free 1-888-636-9990 EN|FR
Home › Products › Kem-A-Trix
Kem-A-Trix logo

Kem-A-Trix lubricants and injectable sealants

Kem-A-Trix formulates and manufactures food-grade and industrial greases and oils in its own Canadian plant, for extreme heat, deep cold, heavy loads, wash-down and chemical exposure. The line runs from non-melting PTFE gels and synthetic gear, hydraulic, compressor and vacuum pump oils to fluorinated greases and injectable fluid sealants. F. Bacon stocks the full line, including products not yet listed online.

NSF H1ISO 21469 & ISO 9001Kosher & Halal (selected lines)Made in Canada
Request a quoteFind your product
−48 °CKG SX synthetic gel in freezers and cold rooms
399 °Cnon-melting: Fahrenheit 800 and Kemplex HT 460
NSF H1food-grade line, made in an ISO 21469 plant
1987TG40750 accepted for Canadian food plants
Find the right product

Pick your application

Choose an application to see what we recommend. Speed, load, contamination and the equipment maker’s specification all matter, so send us the details and we’ll confirm the grade, or cross-reference the product you use today.

Recommended Kem-A-Trix products

Food-plant bearings

Use when General bearings and fittings where incidental food contact is possible.
KG Series (KG 100 / KG 200)KG SX SeriesBKG Series
Why these grades KG is the multipurpose PTFE gel (−20 °C to 180 °C). KG SX is fully synthetic for freezers, wash-down and hotter areas (−48 °C to 235 °C). BKG uses a biodegradable ester base oil.
Full line-up

Six product families

FamilyWhat it coversProducts
Food-grade greases (NSF H1)PTFE gels for incidental food contact, from freezers to ovensKG Series, KG SX, TG40750, Fahrenheit 800, SBG, BKG
Food-grade oils (NSF H1)Hydraulic, gear, compressor, vacuum pump, circulating and oven-chain oilsTCCL / TCCL-P, KGL, TGGL / TGGL-P, Pro-Last FGX / FGE, Pro-Last VPO FGX, Kemvec FG, KCL 220 / 350, 00T 800F, KemWay 68 FG
Industrial greasesEP / anti-wear, non-melting and sealed-bearing greasesThermo-Gel AW, Titanium-G2 / G3, Gear-Gel 003, TBG 680, APG 150, SBG
Industrial oilsSynthetic and mineral compressor, vacuum pump, circulating and gear oilsPro-Last X / XE, Pro-Last VPX, Thermol G / GP
Fluorinated & specialtyFluorinated greases and oils for chemical, oxygen, chlorine and high-heat serviceKemplex 220 / 440, 215 / 435, HT 460, HM 7, 220 VPO / 440 VPO
Injectable fluid sealantsOn-line seals for pump and valve packing, including a food-grade gradeIFS 5400, IFS 4001, IFS 6000HPC, IFS 4600EP, MSC 4000

Most products come in several viscosity or NLGI grades. Kem-A-Trix makes more grades than it lists, and formulates custom products.

Most ordered

Popular products

The grades our customers order most. Ask us for stock and lead time on any other grade.

Kem-A-TrixKG SX SeriesFully synthetic (PAO) PTFE gel for cold rooms, freezers and wash-down. NSF H1, −48 °C to 235 °C.Get pricing →
Kem-A-TrixTG40750 (Thermo-Gel 40750)Non-melting synthetic food-grade gel, −40 °C to 398 °C. A favourite for oven bearings and plastic injection molding.Get pricing →
Kem-A-TrixTCCL / TCCL-PNSF H1 anti-wear hydraulic and machine oil, ISO 22 to 680. Kosher and Halal.Get pricing →
Kem-A-TrixPro-Last FGX / FGESynthetic NSF H1 compressor and circulating fluid. FGE for screw compressors needing 8,000+ hours.Get pricing →
Kem-A-TrixFahrenheit 800 (F800)NSF H1 bearing gel to 750 °F that doesn’t melt, drip or carbonize.Get pricing →
Kem-A-TrixTitanium-G2 / G3Non-melting, titanium-fortified EP grease for open gears, chains and fifth wheels.Get pricing →
Kem-A-TrixIFS 4001General-industrial injectable fluid seal for pumps, valves, compressors and agitators.Get pricing →
Temperature

Temperature reference

Figures as published on Kem-A-Trix data sheets. Ranges marked intermittent are short-term peaks.

ProductTypeTemperature range
KG Series (KG 100 / KG 200)Food-grade gel−20 °C to 180 °C (−4 °F to 350 °F)
KG SX SeriesFood-grade gel, synthetic−48 °C to 235 °C (−54 °F to 455 °F)
BKG SeriesFood-grade gel, biodegradable base−18 °C to 235 °C (0 °F to 455 °F)
TG40750Food-grade gel, non-melting−40 °C to 398 °C (−40 °F to 750 °F)
Fahrenheit 800Food-grade bearing gel−35 °C to 399 °C (−35 °F to 750 °F)
SBG SeriesSealed-bearing gel−48 °C up to 425 °C intermittent, by grade
KCL 220Food-grade oven-chain oil−25 °C to 320 °C
00T 800FFood-grade belt and chain lubricant−40 °C to 427 °C intermittent (−40 °F to 800 °F)
Thermo-Gel AW SeriesIndustrial EP gel−20 °C to 315 °C (−4 °F to 600 °F)
Titanium-G2 / G3Industrial EP greaseHeated past 500 °C (932 °F) without running
TBG 680Wind-turbine bearing gel−42 °C to 165 °C
APG 150Wheel-bearing and chassis grease−40 °C to 180 °C
Kemplex 220 / 440Fluorinated grease−25 °C to 260 °C (220) · −20 °C to 288 °C (440)
Kemplex HT 460Fluorinated grease, silica thickenerUp to 399 °C
IFS 5400Injectable fluid seal, food gradePumps −17 °C to 260 °C · valves −17 °C to 205 °C
Certifications

Certified for food plants

NSF H1Registered for incidental food contact on equipment in and around food processing areas.
ISO 21469 & ISO 9001Hygienic lubricant manufacturing and quality management at the Canadian plant.
Kosher & HalalOn product lines where the data sheet states it, including TCCL and Pro-Last FGX / FGE.
Health Canada listedTherm-A-Gel TG40750, Thermo-Cling TCCL and Thermo-Gear TGGL appear in Health Canada’s reference listing of accepted non-food chemical products.
FDA 21 CFRFood-grade oils formulated to meet 21 CFR 172.878 and 178.3620(a); KG Series greases conform to 21 CFR 178.3570.
Documents for auditsWe send current NSF letters, SDS and TDS for every Kem-A-Trix product on your line.
Custom formulations

Oils and greases formulated for your conditions

Kem-A-Trix formulates its own products, so it can adjust the base oil, thickener or additives when a standard grade won’t do, and it offers private-label oils and greases. It also supplies PAO and ester base oils and additive packages. Tell us the application and we’ll recommend the product.

Talk to usAsk a specialistTell us the application, temperature and what the lubricant will contact.Ask a specialist →
Where it’s used

Industries

Food, beverage & pharmaceuticalProcessing, bottling and packaging lines where incidental product contact is possible: KG, KG SX, TCCL, Pro-Last FGX.
Bakeries & snack foodsOven chains, fryers, proofers, mixers and dryers running hot all shift: KCL, 00T 800F, F800, TG40750.
PackagingFillers, cappers, seamers and conveyors near open product.
Manufacturing & steelBearings, gearboxes, hydraulics and compressors across the plant, including steel mills.
Mining & constructionShock loads, open gears, water and grit: Thermo-Gel AW, Titanium-G.
Agriculture & forestryEquipment that works outdoors, wet and dirty, through every season.
Trucking & fleetWheel bearings, chassis points, fifth wheels and trailers: APG 150, Titanium-G.
Rubber, tire & plasticsTire molds, injection molding machines and hot slide bearings: Kemplex HM 7, TG40750.
Pulp, paper & corrugatingCorrugator bearings and hot, wet machinery: Kemplex 220 and 440.
Chemical processingAggressive chemicals, oxygen, chlorine and reactive service: Kemplex, IFS 6000HPC.
Wind, energy & utilitiesWind turbines, pumps, valves and compressors that can’t be shut down: TBG 680, IFS sealants.
Formats

Sizes we supply

Sizes vary by product.

ProductFormats
Greases and gelsCartridges or tubes · pails · drums
OilsPails · drums · totes
Injectable fluid sealantsSIL (75 mL) and MIL (150 mL) injector loaders; ask us for sealant package sizes

Ask us for current package sizes, stock and lead times. We send the current SDS and TDS for any Kem-A-Trix product on request.

Questions

Using Kem-A-Trix

Are Kem-A-Trix food-grade lubricants NSF H1?

Yes. The food-grade line is NSF H1 registered and made in an ISO 21469 and ISO 9001 certified Canadian plant. We send current NSF letters, SDS and TDS for your files and audits.

What’s the difference between KG and KG SX?

KG is a PTFE gel on USP white mineral oil for general plant use, −20 °C to 180 °C. KG SX is fully synthetic (PAO) and covers −48 °C to 235 °C, so it suits freezers, cold rooms, wash-down and hotter areas.

Which grease for oven and dryer bearings?

TG40750 or Fahrenheit 800. Both are non-melting food-grade gels rated to 750 °F. F800 allows relubrication intervals up to 10 times longer than conventional greases.

What is an injectable fluid seal?

A fibrous, flexible sealing compound that replaces braided packing and mechanical seals in the stuffing box. When a leak appears, a turn of the injector loader tops it up while the pump keeps running, so there’s no shutdown and no gland to tighten. IFS 5400 is food grade, IFS 4001 is the general-industrial grade and IFS 6000HPC is for caustic service.

Do you still have Therm-A-Gel, Thermo-Cling and Thermo-Gear?

Yes. Those are the original names of TG40750, TCCL and TGGL. The chemistry is the same, made by Kem-A-Trix in Canada.

Can you cross-reference the lubricant we use now?

Yes. Send us the brand and grade and we’ll match it to the right Kem-A-Trix product and explain any difference.

Quote · SDS / PDS

Tell us what you need.

Product, quantity, application, or the product you use today for a cross-reference. We reply within one business day, in English or French.

450-218-9908 [email protected]

We use your information to respond to your request. Privacy