Canadian-based · North American reach · Since 1882
450-218-9908 Toll-free 1-888-636-9990 EN|FR
Home › Brands › Halocarbon
Halocarbon logo Official Canadian distributor

Halocarbon PCTFE lubricants

When standard lubricants break down, PCTFE keeps working. Inert, nonflammable fluids for chlorine, oxygen, vacuum and aggressive chemical service, stocked and supported in Canada by F. Bacon.

Request a sample Find your grade
Centrifugal pumps and stainless piping in a chemical plant

A rare combination of properties in one fluid

Why PCTFE

PCTFE (polychlorotrifluoroethylene) is a fully halogenated chemistry built for conditions where hydrocarbon and silicone products fail.

Chemically inertResists reaction even in aggressive chemical environments.
NonflammableReduces ignition risk in oxygen-rich systems, high-heat equipment and clean rooms.
Oxidation resistant & thermally stableHolds its performance across demanding temperatures.
Low vapour pressureLimits fluid loss and vacuum contamination.
High dielectric strengthSafe around electrically sensitive systems.
Water immiscibleStays a separate phase instead of mixing with water.

No oxygen in the backbone, so far more resistant to Lewis acids

PCTFE works where PFPE fails

Both are top-tier fluorinated fluids. PCTFE's molecule contains no oxygen atoms, which makes it substantially more resistant than PFPE to Lewis acids such as aluminum trichloride, iron and zinc chlorides and boron trifluoride. That's why it's the recommended choice for chlorine and chlor-alkali service, for mechanical-seal barrier fluids handling reactive gases, and for vacuum pumps on aggressive etch and deposition processes.

Weight loss after exposure to AlCl3
PCTFE
0% · no weight loss
PFPE-K
16%
PFPE-Y
17%
Test conditions: 174 °C for 24 hours, 1 wt% anhydrous AlCl3, nitrogen atmosphere. PFPE-K and PFPE-Y are the two main PFPE chemistries. Source: Halocarbon test data.
What changed after exposure
PCTFEPFPE
WeightNo weight loss16–17% weight loss
AcidityNo increaseIncreased
ViscosityNo reductionSignificant loss
Why it matters
  • Helps preserve lubricant viscosity
  • Limits the formation of acidic degradation products
  • Supports consistent vacuum pump operation
Where it matters

Chlorinated and fluoride-based etch and deposition chemistries can produce Lewis-acid-forming byproducts. Dry pumps are especially exposed: the byproducts can migrate upstream, past process seals, and reach the lubricant.

BCl3BF3SiCl4AlCl3

Find the right oil

Choose your application

Grade numbers roughly follow viscosity: low numbers flow freely in the cold and in instruments, high numbers carry heavier loads.

Recommended Halocarbon oils

Pumps & compressors

Use when Oil life, uptime and chemical exposure are the concern.
Halocarbon 27Halocarbon 56Halocarbon 95
Why Halocarbon Resists breakdown in harsh chemical environments.

Where it's used

Where failure isn't an option

Chemical processing
Pumps, compressors, seal barrier fluids
Chlorine & chlor-alkali
Pumps, valves, seals
Semiconductor
Vacuum pumps in reactive-gas service
Gas handling & oxygen
Valves, regulators, O-rings
Instrumentation
Diaphragm seals and fill fluids
Thermal control
Calibration baths and chillers
Sealing & assembly
Threads, anti-galling
Machining
InfinX™ MWF for hard alloys
Technician in a semiconductor clean room

InfinX™ metalworking fluid

Make every carbide tool last far longer

Results from a U.S. aerospace manufacturer machining Inconel® 718 under production conditions, normalized to the next-best fluid.

Request an InfinX™ sample
71%longer tool life
35%better surface finish
42%higher efficiency

No microbial odour

About Halocarbon

Halocarbon began by synthesizing inert lubricants for nuclear applications, then moved into aerospace and defence, life sciences, semiconductor fabrication and precision machining. Today it works across Engineered Fluids, Electronics Solutions and Life Sciences.

Technical literature on halocarbon.com →
Buying in Canada

F. Bacon Industriel is Halocarbon's official Canadian distributor. We hold stock, quote in Canadian dollars, ship across the country and help you choose the right grade.

Talk to us →
Test it in your system

Send us the application. We'll recommend a grade and arrange a sample.

Tell us the fluid or gas involved, operating temperature and pressure, and what you use today.

450-218-9908 [email protected]

We use your information to respond to your request. Privacy