Official Canadian distributor
PCTFE and InfinX™ PFPE greases for valves, O-rings, threads and bearings in chlorine, oxygen and chemical service, rated from −60 °C to 399 °C. Stocked and supported in Canada by F. Bacon.
Find the right grease
Pick the job and we’ll show the grades Halocarbon makes for it. Not sure? Send us the application and we’ll match the grade, consistency and temperature range.
Both are inert, nonflammable fluorinated greases. The base oil decides where each one does best.
PCTFE greases
Service temperatures in °C.
| Grade | Thickener | NLGI | Service temp. | Best for |
|---|---|---|---|---|
| Halocarbon 25-5S | Silica | 3 | −20 to 175 | Valves and gaskets. MIL-G-47219A. |
| Halocarbon 25-10M | PCTFE polymer | 1 | 0 to 135 | Softest grade. Won’t separate oil. Use where silica is a concern. |
| Halocarbon 25-20M | PCTFE polymer | 4 | −5 to 150 | Hardest grade, high-viscosity base oil. |
| Halocarbon 28 | Silica | 2 | −20 to 120 | All-purpose silica-thickened grade. |
| Halocarbon 28LT | Silica | 2 | −45 to 95 | Low temperature. |
| Halocarbon MT-3I | PTFE, with molybdenum | 3 | −20 to 175 | Thread sealant and anti-galling. Chlorine Institute Pamphlet #164. |
| InfinX™ HaloVac 25 | Silica | 3 | −20 to 175 | Lab vacuum, stopcocks, glass and ceramic joints, plug valves. |
InfinX™ PFPE greases
Service temperatures in °C.
| Grade | Thickener | NLGI | Service temp. | Best for |
|---|---|---|---|---|
| General purpose and temperature range | ||||
| InfinX™ MRO KF202 | PTFE | 2 | −60 to 132 | Low temperature. NSF H1. |
| InfinX™ MRO KF205 | PTFE | 2 | −40 to 204 | General purpose. NSF H1. |
| InfinX™ MRO KF206 | PTFE | 2 | −40 to 260 | High temperature. |
| InfinX™ MRO KF207 | PTFE | 2 | −34 to 288 | Highest PTFE-thickened range. |
| InfinX™ MRO KF407 | Silica | 2 | −10 to 399 | Ultra-high temperature. |
| InfinX™ MRO KF2R5 · KF2R6 · KF2R7 | PTFE | 2 | Up to 204 · 260 · 288 | Corrosion-inhibited versions of KF205, KF206 and KF207. |
| Specialty | ||||
| InfinX™ MRO KFC6 · KFC7 | PTFE | 2 | −25 to 288 | Anti-corrosion, for paper-corrugator bearings. NSF H1. |
| InfinX™ AERO KFMS3 | PTFE | 2 | −40 to 260 | MIL-PRF-27617G Type III. NSF H1. Bearings, cryogenic gas and liquid. |
| InfinX™ MRO KFTM | PTFE | 2 | −20 to 288 | Tire molds. |
| InfinX™ HaloVac Ultra | PTFE | 2 | −20 to 300 | Vacuum service. |
| InfinX™ HaloVac 600 · 601 | PTFE | 2 | −80 to 204 | Vacuum service, very low temperature. |
Figures from Halocarbon’s published product guide. Always check the current data sheet before you specify; we can email it with your quote.
Where they’re used
One compatible chemistry, three forms
OilsPumps, compressors, vacuum, seal barrier fluids and instrument fill.View oils →
WaxesChemically resistant coatings and seals for reactive-gas cylinders, threads and joints.View waxes →
Why PCTFEHow Halocarbon chemistry differs, where it is used, and InfinX™ metalworking fluid.Halocarbon main page →Tell us the fluid or gas involved, operating temperature and pressure, and what you use today.