Official Canadian distributor
The solid form of the same inert, nonflammable PCTFE chemistry. For seals that must resist chemicals and stay put: thread sealing on lines carrying aggressive chemicals or oxygen, and laboratory joints and glassware.
What they’re for
Halocarbon waxes keep the properties of PCTFE oils in a solid that won’t run off.
Grades
The higher the number, the firmer the wax and the higher the temperature it holds its shape.
| Grade | Minimum melting point | Viscosity at 71 °C (160 °F) | Notes |
|---|---|---|---|
| Halocarbon Wax 40 | Not listed | 190 cSt | Softest grade |
| Halocarbon Wax 600 | 57 °C (135 °F) | 1,000 cSt | Mid-range melting point |
| Halocarbon Wax 1500 | 132 °C (280 °F) | Not listed | Highest melting point |
Figures from Halocarbon’s PCTFE product data sheet. Ask us for current availability and the latest data sheet.
Need it to spread instead?
If the seal has to be reworked or the joint turned often, a grease may suit better. Halocarbon MT-3I is made for thread sealing and anti-galling, and InfinX™ HaloVac 25 for stopcocks, glass joints and lab vacuum.
Compare Halocarbon greases →One compatible chemistry, three forms
Tell us the fluid or gas involved, operating temperature and pressure, and what you use today.