Canadian-based · North American reach · Since 1882
450-218-9908 Toll-free 1-888-636-9990 EN|FR
Home › Products › Coatings & metal finishing
Coatings & metal finishing

Industrial coatings and metal finishing

Everything for a paint line, from wash to cure: cleaners and degreasers, iron phosphate pretreatments, a rust-inhibiting metal treatment, epoxy and alkyd primers, and low-VOC, isocyanate-free topcoats. Made in Ontario by a Canadian, family-owned manufacturer and supplied by F. Bacon.

Made in CanadaLow-VOC optionsCompatible from wash to cure
Request a quoteFind your product
5 stepsclean, pretreat, prime, topcoat, cure: one compatible system
100 g/LVOC water-based epoxy primer and topcoat
1,000 hhumidity resistance, rust-inhibiting metal treatment
Since 1967the manufacturer’s experience in metal finishing
How it works

One system, from wash to cure

Each step is designed to work with the next, so adhesion and corrosion protection come from the whole system, not just the paint.

1. CleanAlkaline and acid cleaners remove oil, grease, shop soil, light scale and oxides.
2. PretreatIron phosphate cleaner-coaters and sealing compounds give the paint a surface to grip.
3. ProtectA water-based, self-healing metal treatment stops rust on bare or lightly coated steel.
4. PrimeTwo-component epoxy primers (solvent or water-based) and a fast-dry alkyd primer.
5. TopcoatIsocyanate-free two-component topcoats and single-component water-based air-dry and force-dry topcoats.
Find the right product

What do you need to do?

Choose a job to see the product type for it. Tell us the metal, the line (dip, spray, pressure washer, hand) and the cure, and we’ll confirm the product.

Recommended products

Degreasing before paint

Use when Oil, grease and shop soil on steel or stainless.
Alkaline liquid cleaner (NPE-free)
Why these grades A strong caustic cleaner with wetting agents and emulsifiers. For ferrous metals and stainless steel; not for aluminum or zinc.
Full range

Product types we supply

TypeWhat it doesKey data
Alkaline cleanerRemoves oil and grease from steel and stainless steelLiquid, NPE-free; not for aluminum or zinc
Phosphoric acid metal prepCleans and deoxidizes before welding or painting; dip or hand wipeSteel, aluminum, zinc and alloys; NPE-free
Iron phosphate cleaner-coatersClean and phosphate in one step in pressure and power washers40–70 mg/sq ft on mild steel; also zinc, aluminum, magnesium
Sealing compoundsSeal the phosphate coating after pretreatmentAsk us for the right sealer for your line
Rust-inhibiting metal treatmentWater-based, self-healing corrosion protectionFlat; 5B adhesion; 1,000 h humidity (ASTM D1735)
Epoxy primer, solvent-basedTwo-component; hard, chemical- and heat-resistant400 g/L VOC; satin; 500 h salt spray, under 1 mm creep
Epoxy primer, water-basedTwo-component; under topcoats or as a one-coat finish100 g/L VOC; HAPs-free; flat
Alkyd primerSingle-component, fast-dry, anti-corrosiveAir spray, HVLP, airless, dip or brush
Isocyanate-free topcoat, solvent-basedTwo-component; chemical and weather resistance291 g/L VOC; 90 gloss; HAPs-free
Isocyanate-free topcoat, water-basedTwo-component; cross-linked, solvent-resistant100 g/L VOC; 60–70 gloss; HAPs-free
Water-based topcoats, air dry and force drySingle-component exterior finishes139–143 g/L VOC; 80 gloss; HAPs-free
Truck and bus washAutomated touchless, brush and wand washingFormulas for municipal and private fleets

Figures from the manufacturer’s published data. We send the current technical and safety data sheets with your quote.

Where it’s used

Industries

Transportation & fleetsTrailers, truck bodies and buses, plus fleet washing.
Cargo containers & tanksCorrosion protection for steel that lives outdoors.
AgricultureImplements and equipment that face weather, fertilizer and mud.
MiningHeavy equipment in wet, abrasive conditions.
Automotive & partsProduction parts that must pass chip and cyclic-corrosion tests.
Infrastructure & fabricationStructural steel, railings and fabricated parts.
Custom formulation

Matched to your line

The manufacturer adjusts its cleaners, pretreatments and coatings to suit your facility, with in-house lab testing and development. Tell us your metal, how you apply (dip, spray, pressure washer or hand), your cure and the performance you need, and we’ll recommend a system or set up a trial.

Talk to usAsk a specialistTell us the substrate, the process and the test the finish has to pass.Ask a specialist →
Questions

Coatings and pretreatment FAQ

Why does pretreatment matter if I’m using a good paint?

Most coating failures start under the paint. Cleaning removes oil and soil, and an iron phosphate conversion coating gives the primer something to grip, which improves adhesion and slows corrosion creep at chips and scratches.

Do the products work together?

Yes. The cleaners, pretreatments, primers and topcoats are designed as one system, compatible from wash to cure, so you aren’t matching chemistry from different makers.

Do you have low-VOC options?

Yes. Water-based epoxy primer and topcoats run from 100 to 143 g/L VOC and are HAPs-free. Solvent-based versions are available where the job calls for them.

What does isocyanate-free mean for my shop?

The two-component topcoats cross-link without isocyanates, so you get a tough, chemical-resistant film without handling a conventional isocyanate-cured urethane.

Can the coatings be adjusted for our line?

Yes. The manufacturer customizes products to work in your facility and has its own lab for testing and development. Tell us your substrate, process and cure, and we’ll set it up with them.

Quote · SDS / PDS

Tell us what you need.

Product, quantity, application, or the product you use today for a cross-reference. We reply within one business day, in English or French.

450-218-9908 [email protected]

We use your information to respond to your request. Privacy