Greases, oils, pastes and chain lubricants that keep working from cryogenic cold to oven heat, from the brands we carry. Tell us the lowest and highest temperature, the speed and load, and anything the lubricant will contact, and we’ll match the product.
| Product | Brand | Rated to | Typical use |
|---|---|---|---|
| Greases | |||
| GPL 407 and XHT-BDX | Krytox™ | 399 °C (GPL 407) | PFPE greases for the hottest bearings; non-melting, nonflammable, long life |
| InfinX™ PFPE greases | Halocarbon | 399 °C | Bearings and high heat, including corrosion-inhibited and NSF H1 grades |
| TG40750 and Fahrenheit 800 | Kem-A-Trix | 398–399 °C | Non-melting food-grade gels for oven, dryer and kiln bearings |
| Kemplex HT 460 | Kem-A-Trix | 399 °C | Fluorinated grease with silica thickener that won’t carbonize |
| High Temp grease | Lubriplate | 260 °C | Non-melt bentone grease with frequent relubrication |
| Chain and oven lubricants | |||
| HTCL-FG 220 and 68 | Lubriplate | Auto-ignition above 371 °C | NSF H1 synthetic ester oven chain oils that prevent carbon build-up |
| KCL 220 / 350 and 00T 800F | Kem-A-Trix | 320 °C (KCL 220); 427 °C intermittent (00T 800F) | Food-grade oven chain oils for automatic lubricators or brushing on hot chains |
| Food Grade 220 H1 and Graphite 220 | Chainguard | 315 °C; 650 °C (Graphite 220) | NSF H1 oven chain oils with low deposits |
| Pastes and anti-seize | |||
| 1000 Paste and P-37 | Molykote | 650 °C (1000 Paste); 1,400 °C (P-37) | Anti-seize for bolts and threads in heat; P-37 for stainless and turbine bolting |
Ratings are the published upper limits; real service life depends on speed, load and relubrication interval. Ask us before you specify.
| Product | Brand | Rated down to | Typical use |
|---|---|---|---|
| Krytox™ PFPE greases and oils | Krytox™ | −70 °C, depending on grade | Light-oil GPL grades for cold and high speed; nonflammable and oxygen-safe |
| Halocarbon oils | Halocarbon | −124 °C (Halocarbon 0.8) | Instrument fill, gauges and cryogenic gas and liquid service |
| Halocarbon greases | Halocarbon | −60 °C | Valves, O-rings and threads in cold oxygen and chemical service |
| 33 Medium | Molykote | −73 °C | Extreme low-temperature silicone grease |
| KG SX Series | Kem-A-Trix | −48 °C | Synthetic NSF H1 gel for freezers, cold rooms and wash-down |
| Low Temp grease and Aero | Lubriplate | −51 °C | Cold-weather multi-purpose greases; Aero for low-torque start-up |
| SFL Series | Lubriplate | Freezer service | NSF H1 synthetic greases for areas that are both cold and hot |
Two things: a base oil that resists oxidation and evaporation (synthetics such as PFPE and esters), and a thickener that doesn’t melt (PTFE, silica or bentone). Non-melting greases won’t run out of a hot bearing, but they still need relubricating.
Often, yes. A grease that is fine at room temperature can stiffen in the cold and starve the bearing at start-up. Low-temperature greases use lighter or synthetic base oils that stay mobile.
It depends on the temperature, what the lubricant contacts (food, oxygen, chemicals) and your budget. Send us the conditions and we’ll recommend one, with an alternative where there is one.
Product, quantity, application, or the product you use today for a cross-reference. We reply within one business day, in English or French.