Canadian-based · North American reach · Since 1882
450-218-9908 Toll-free 1-888-636-9990 EN|FR
Home › Industries › Pulp & Paper
Industries we serve · Pulp & paper

Lubrication for pulp and paper mills

Paper machines run around the clock in heat, steam and water. We supply the greases, oils and automatic lubrication systems that keep wet-end, dryer-section and drive bearings running between shutdowns.

Wet end to dryer sectionAutomatic lube systems
Book a plant surveyFind your lubricant
Paper machine with a large paper roll
399 °Ctop rating of Krytox™ GPL 407 high-temperature grease
Hundredsof grease points fed on schedule by one automatic system
1 dayreply time for quotes and recommendations
The challenge

Why paper machines are hard on lubricants

A single missed lube point can stop the whole line.

Water & steamWet-end bearings fight constant water washout.
HeatDryer-section bearings run hot enough to cook ordinary grease.
Hard-to-reach pointsHundreds of bearings, many in hot or hard-to-reach areas.
ChemicalsChemical-recovery pumps and valves see chlorine and caustic.
Find the right lubricant

Pick your equipment

Choose an area of the mill to see what we recommend. We’ll confirm the right grade for your conditions before you order.

Recommended for this area

Dryer & felt-roll bearings

Use when Bearings in the dryer section running hot all shift.
Krytox™ XHT-BDXKrytox™ GPL 407
Why these grades High-temperature PFPE greases that last far longer than conventional grease, so you relubricate less.
Equipment guide

Common problems, and what fixes them

AreaCommon problemWhat we recommend
Dryer section bearingsGrease cooks; frequent relubricationKrytox™ XHT-BDX, GPL 407
Felt rollsHeat and moisture shorten grease lifeKrytox™ high-temperature greases
Wet endWater washoutLubriplate water-resistant greases
Drives & gearboxesWear, heat, short oil lifeLubriplate APG, SPO and PGO gear oils
HydraulicsWear, cold startsLubriplate HO and AW oils, Minus 70
Whole machineMissed or inconsistent greasingLincoln automatic lubrication systems
Chemical-recovery pumpsChlorine and caustic attackHalocarbon PCTFE oils
Chemical-recovery valvesPacking leaksKem-A-Trix injectable sealants

We’ll confirm the right grade for your conditions before you order.

Switching to fluorinated grease

Fewer relubrications in the dryer section

PFPE greases like Krytox™ resist heat and oxidation, so hot bearings go much longer between relubrications.

Bearings should be cleaned of the old hydrocarbon grease first, or the residue carbonizes. We’ll walk your maintenance team through the changeover.

Talk to usPlan a changeoverSend us the bearing list and current schedule and we’ll suggest where fluorinated grease pays off.Ask a specialist →
Brands

What we supply

Krytox logo
PFPE oils & greasesKrytox™High-temperature PFPE greases for dryer and felt-roll bearings, where long life cuts relubrication.
Krytox™ greases →
Lubriplate logo
Industrial & food-grade lubricantsLubriplateCirculating, gear and hydraulic oils, and water-resistant greases for the rest of the mill.
Lubriplate →
Lincoln logo
Automatic lubricationLincolnAutomatic systems that grease hundreds of points on schedule.
Lincoln →
Halocarbon logo
PCTFE oils, greases & waxesHalocarbonPCTFE oils and greases for chemical-recovery pumps and valves exposed to chlorine.
Halocarbon →
Kem-A-Trix logo
Specialty lubricants & injectable sealantsKem-A-TrixInjectable sealants for leaking pump and valve packing.
Kem-A-Trix →
Plant survey · Quote

Tell us about your mill. We’ll match each area to a lubricant.

Send the equipment and what you use today, or book a walk-through. We reply within one business day, in English or French.

450-218-9908 [email protected]

We use your information to respond to your request. Privacy