Canadian-based · North American reach · Since 1882
450-218-9908 Toll-free 1-888-636-9990 EN|FR
Home › Products › Lubriplate › Multi-purpose greases
Lubriplate logo

Lubriplate multi-purpose greases

Synthetic, high-performance and petroleum-based multi-purpose greases, plus greases for open gearing, special conditions and specialty jobs, from everyday plant greasing to mining, quarries and paper mills.

Synthetic and petroleumEvery NLGI gradeDeep stock in Eastern Canada
Request a quoteRequest SDS / PDS
Full line-up

Lubriplate greases

ProductDescription
Synthetic, high-performance multi-purpose greases
SYNXTREME HD SeriesExtreme-duty, high-temperature synthetic calcium sulfonate complex greases with outstanding anti-wear and extreme-pressure protection, high water resistance, shear stability and oxidation resistance. Three NLGI grades. HD-2 is NLGI GC-LB certified for wheel bearings and chassis; HD-1/220 and HD-2/220 use a heavier ISO 220 base fluid for bearings running hot.
SYN-1600 Series100% PAO lithium complex greases with better oxidation stability, wear protection and temperature range, fortified against rust, corrosion and bleed. For most general grease applications.
SYN-3001 and SYN-3002Moly-fortified (5%) heavy-duty PAO lithium complex greases, highly water resistant, with excellent high and low temperature performance. For all types of heavy equipment.
SYN-EMB100% synthetic, high-temperature lithium complex grease for medium to high speed electric motor bearings.
SYN GR-132PAO and ester lithium complex grease with excellent mechanical stability, for high-speed anti-friction bearings and very low temperatures.
Petroleum oil-based multi-purpose greases
1500 SeriesLithium complex greases that handle higher temperatures than traditional lithium greases, with high film strength, shear stability and long life. Four NLGI grades.
LTR-2Heavy-duty, tacky, red lithium complex extreme-pressure grease, highly water resistant, for construction, quarry, aggregate and mining equipment.
1240 SeriesTacky lithium polymer extreme-pressure greases for heavy pressure and shock loads. Three NLGI grades.
No. 1444Tacky aluminum complex grease for heavy-duty construction and mining equipment: slow to moderate speed bearings and chains exposed to heat, steam and water.
No. 3000 and 3000-WTacky moly-lithium extreme-pressure greases that leave a tenacious film against water, rust and corrosive contaminants. 3000-W is for cold weather.
730 SeriesAluminum complex greases with high load-carrying ability and resistance to water and steam. Three NLGI grades.
No. 1200-2Heavy-duty general-purpose lithium grease for industrial and automotive use, with extreme-pressure and anti-wear additives.
630 SeriesMulti-purpose lithium greases, the traditional general-purpose choice. Four NLGI grades.
Greases for special conditions
High TempNon-melt bentone grease for 4 °C to 260 °C (40 °F to 500 °F) with frequent relubrication.
Low TempAnhydrous calcium grease for cold applications down to −51 °C (−60 °F).
MAG-00 and MAG-1Lithium polymer greases with a wide temperature range that work well in centralized and automatic systems. MAG-00 is semi-fluid and also suits leaking gearboxes.
930 SeriesNon-melt bentone greases for higher temperatures; 930-AA and 930-AAA are recommended for centralized and automatic greasing systems.
100 and 130 SeriesTraditional calcium greases for plain bearings, cams, slides and light duty up to 77 °C (170 °F): No. 105, 107, 110, 115, 130-AA and 130-A.
Greases for gearing
Gear Shield SeriesLithium open gear greases for exposed gears, including Extra Heavy for adverse conditions and Low Temp for cold weather. Excellent fifth wheel lubricants.
No. 176Solvent-free, adhesive semi-fluid open gear grease for centralized systems.
Specialty greases
V-61 Silicone Faucet Valve LubricantNSF/ANSI 61 certified silicone grease for non-silicone O-rings, faucet valves and drinking water system parts. Resists chemicals, dilute acids and alkalis, and water wash-out. Not for oxygen service.
EMB Electric Motor Bearing GreaseNLGI 2 lithium polymer grease for high-speed electric motor bearings, fans and other high-speed ball and roller bearings.
Poly HP-2Polyurea grease on high-quality paraffinic base oil for high-speed electric motor bearings and other industrial uses.
Power Hammer & Chisel GreaseHeavy-duty aluminum complex grease with moly, copper and graphite for power hammers; greatly extends shaft and bushing life.
X-357Moly-fortified extreme-pressure lubricant that penetrates and adheres, for pintle hooks, slide axles, open gears and fifth wheels.
No. 777Starter motor shaft lubricant approved to Ford specification ESF-M1C-26-A.
No. 107 Concrete Form ReleaseSoft white grease sprayed on form surfaces for clean release once the concrete sets, without staining.
DS-ES Electric Switch LubricantFor electrical switch contacts, sockets and wiring harness connectors, compatible with metal, plastic and rubber.
GR-132 Portable Tool GreaseLight lithium grease for the small gear cases in portable tools, where fluid friction must stay low.
Lithium Brick Grease and Lithplex Brick GreaseNLGI 6 brick greases for open-slot and open-well bearings at quarries and paper mills. Lithplex has a 274 °C (525 °F) dropping point.
AeroNLGI 1 lithium grease for cold applications down to −51 °C (−60 °F), with low-torque start-up. Excellent for garage door mechanisms.
No. 5555Semi-fluid anhydrous calcium lubricant for automatic lubrication systems in cold environments.
Neptune Launching Base Coat and Slip CoatShip-launching greases used for decades for everything from barges to aircraft carriers. The blue base coat carries more than ten tons per square foot; the orange slip coat goes on top.

Need a data sheet? Ask for the current SDS or PDS on the form below and we’ll email it.

Quote · SDS / PDS

Tell us what you need.

Product, quantity, application, or the product you use today for a cross-reference. We reply within one business day, in English or French.

450-218-9908 [email protected]

We use your information to respond to your request. Privacy