Lubriplate’s complete line of high-performance, NSF H1 registered food machinery grade lubricants is designed to provide total food processing and bottling plant lubrication capability. They are made under NSF/ISO 21469 certified and ISO 9001 registered quality standards, from the highest quality base stocks combined with anti-wear additives.
All Lubriplate H1 lubricants are made with ingredients that comply with FDA regulation 21 CFR 178.3570 for lubricants with incidental food contact. They meet NSF H1 safety standards and are authorized for use in federally inspected meat and poultry plants. Clean, safe and non-toxic, their use can eliminate lubrication as a critical control point in HACCP programs.
| Product | Description |
|---|---|
| Synthetic food machinery grade fluids (NSF H1) | |
| SFGO Ultra Series | 100% synthetic, PAO-based, high-performance multi-purpose fluids for severe conditions and very high or low temperatures, with outstanding oxidation resistance and thermal stability. For air compressors, hydraulic systems, bearings, gearboxes, pumps and chains. Meets FDA 21 CFR 178.3570 and 172.882. SFGO Ultra 220 and 460 pass 14 stages of the FZG test. |
| Syncool FG | 100% synthetic polyglycolester (PGE) air compressor fluid for high-performance rotary screw and rotary vane compressors running at high temperatures. Readily biodegradable. |
| SSO-FG 100 and SSO-FG 150 | Fully synthetic lubricants for Angelus and Zacmi seamers and canning equipment, with anti-wear, anti-rust and anti-corrosion protection through water, steam and caustic wash-downs. |
| PGO-FGL Series | PAG-based synthetic extreme-pressure gear lubricants for helical, bevel helical, planetary and worm gearboxes, with strong protection against micropitting, wear and corrosion. |
| Synthetic high-temperature oven chain lubricants (NSF H1) | |
| HTCL-FG 220 and HTCL-FG 68 | 100% synthetic polyol ester oven chain lubricants for bakery, drying, tenter frame, heat-treating and paint-curing oven chains. They prevent carbon build-up, reduce smoke and oil consumption, and have high auto-ignition temperatures (above 371 °C / 700 °F). HTCL-FG 68 can be fed through micro-lube, spray, mist and drip systems or applied by hand. No harmful VOCs. |
| Synthetic food machinery grade greases (NSF H1) | |
| SYNXTREME FG Series | Synthetic calcium sulfonate complex greases with long-lasting anti-wear and extreme-pressure protection, highly resistant to water and caustic wash-downs. FG-1/220 and FG-2/220 use a heavier ISO 220 base fluid for bearings running hot. Contain Lubri-Armour anti-microbial additive. |
| SFL Series | Synthetic aluminum complex greases with a very wide operating temperature range, high shear stability and water resistance. For freezers and areas that are both cold and hot. Four NLGI grades. Contain Lubri-Armour. |
| SYN ST H-1 Special | NLGI 3 silicone lubricant with PTFE for O-rings and seals on bottling, dairy, food processing and dispensing equipment. Resists hot water, steam and alkaline solutions. Not for oxygen service. |
| USP mineral oil-based food machinery oils (NSF H1) | |
| FMO-AW Series | Anti-wear USP white mineral oils in ten ISO grades for a wide range of applications. FMO-350-AW also comes in orange for leak detection. FMO-1100-AW and FMO-2400-AW pass 12 stages of the FZG test. The original FMO oils without anti-wear additives are still available. |
| FMO Series 45 to 500 | Pure USP white mineral oils, NSF H1 and 3H registered for direct contact with the edible product (FDA 21 CFR 178.3570, 178.3620 and 172.878). |
| FP-150 and FP-150L | Clear, tacky, adhesive oils that resist heavy water wash-down and steam. For helical gearboxes, chains, linkages, cams and slides where a dripless fluid is wanted. |
| Food Grade Cooker Oil | Zinc-free oil for the Manzel lubricators and micro-valve systems on cookers and sterilizers in canning and other hot, humid applications. |
| Seamer Oil FG Series | USP mineral oil seamer oils for can seaming machines with once-through or recirculating oil systems. Recommended for Angelus seamer models 61H, 120L, 121L, 140S and 180S. |
| STO-FG Oil | Non-corrosive oil for the stirrups on bottle filling machines. |
| PM 500 White Oil | Contains emulsifying agents that wet the surface and leave an oily film. Used on pear machines. |
| Pan divider oils (NSF H1 and 3H) | |
| Pan Divider Oil and PDO Light | USP white mineral oils that meet FDA 21 CFR 172.878 for direct food contact, for pan divider applications. |
| USP mineral oil-based food machinery greases (NSF H1) | |
| FGL Series | Aluminum complex greases made to replace H2 greases throughout the plant, with anti-wear, anti-rust and anti-corrosion additives and resistance to water and caustic wash-down. Four NLGI grades; FGL-CC for automatic systems on high-speed can closers. Contain Lubri-Armour. |
| CS-FG EP-2 | Calcium sulfonate complex grease with superior rust and corrosion protection, water wash-off resistance and high-temperature performance. Contains Lubri-Armour. |
| ML Series | White anhydrous calcium greases, long-time favourites in food processing. Three NLGI grades. Contain Lubri-Armour. |
| PURE TAC and PURE TAC LIGHT | Tacky aluminum complex greases for chemically treated water, heat and steam: medium to slow bearings, open gears and hydrostatic cooker chains. Contain Lubri-Armour. |
| CLEARPLEX Series | Clear aluminum complex greases for plain and anti-friction bearings in food and beverage plants. CLEARPLEX-1 suits the lubrication systems of high-speed can seaming and closing equipment. Contain Lubri-Armour. |
| Food machinery grade spray lubricants (NSF H1) | |
| FGL-1 Spray | H1 grease in an 11 oz (312 g) spray can, with anti-wear, anti-rust and anti-corrosion additives. Contains Lubri-Armour. |
| FMO-350-AW Spray | Anti-wear food machinery oil in a spray can. |
| Super FML-2 Spray | White H1 lubricant in a spray can. Contains Lubri-Armour. |
| SFGO Ultra-7 Spray | Synthetic chain and penetrating fluid for bottling, dairy and food machinery: chains, slides and tools. |
| Food Grade Silicone Lubricant | Silicone spray for slides, chains, O-rings and rubber seals on bottling, dairy and food machinery. |
| FMO-85-AW Spray | H1 oil in a 14 oz (414 ml) non-aerosol pump spray. |
| Cleaning and flushing fluids (NSF H1) | |
| Syn Flush FG | 100% synthetic fluid that cleans equipment internally, without tear-down, when switching from an H2 to an H1 product. Compatible with PAO, polyol ester, diester, PAG and mineral fluids. Bottles, pails and drums. |
| Pure Flush | Lubricating flushing oil used with the existing lubricant to clean bearings, gear cases, hydraulic and central lube systems, air lines, chains and air tools without dismantling. Bottles, jugs, pails, quarter drums and drums. |
| Food machinery oils, class H2 | |
| No. 72-C Oil | Steam peeler oil that leaves an oily film to prevent chatter. |
| No. 78 Cooker Oil | For Manzel lubricators on A-B cookers, sterilizers and FMC cookers. Corrosion and oxidation resistant. |
| STO-4 Oil | Non-corrosive oil for the stirrups on bottle filling machines. |
H1 lubricants are made with ingredients that comply with FDA 21 CFR 178.3570 for incidental contact with the edible product. H2 lubricants may be used where there is no possibility of the lubricated part contacting the edible product. Need a data sheet? Ask for the current SDS or PDS on the form below and we’ll email it.
Product, quantity, application, or the product you use today for a cross-reference. We reply within one business day, in English or French.